Look on the net for pfsense troubleshooting for further clarification. Second thing I would do is just check the cpu/memory performance stats in system information on the pfsense home page and the state table size.įinally if you can’t find a reason for it check your hardware to see if it’s one of the known nics to be a problem, some have TSO/LRO or checksum or hardware offloading bugs in their firmware and to fix that is to tell pfsense to turn it off in system tuneables. Then switch to the genral tab and see if any errors popup there. This is just to determine if the gateway (modem) is the issue and not pfsense.
GW_WAN 8.8.8.8: Alarm latency 29224us stddev 8856us loss 25%įirst number is the ip it pinged, second number is average latency, third is deviation in latency (jitter), fourth is packet loss. It will tell you if you’re having latency issues or packet loss, should be setup to use dns for ping refrence. The DVD Image (ISO) Installer is used to create a DVD version used to install on virtual machines or systems with a DVD drive.Look under Status > System Logs > Gateways (tab) The entire hard drive will be overwritten, dual booting with another OS is not supported. This is the preferred means of running pfSense software. The USB memstick image is meant to be written to a USB flash drive before use and includes an installer that installs pfSense software to the hard drive on your system. If you purchased a Netgate product, refer to the product manual for your appliance to see which reinstall image you need.
The Netgate ADI image only supports a serial installation from memstick and does not come with VGA option. The amd64 architecture (which works even on Intel 64-bit CPUs) can address more memory and may have other performance advantages, but requires a compatible CPU. If you have a 64-bit capable CPU, use the amd64 version. You can determine the files needed for your install by reading the rest of this page for guidance.
0 kommentar(er)
